x68000:pc_floppy_drive
PC Floppy Drive on X68000
The floppy drives in the X68000 are just regular PC drives with extra features. In fact, on the PRO they share the same part numbers with their PC counterparts (It's a TEAC drive). If you can live without soft-eject and computer-controlled blinking lights, you can easily connect a normal PC drive to the X68000. Simply follow this connection diagram, and you're done!
| X68000 | Signal | PC Floppy |
|---|---|---|
| 1 | Density | 2 |
| 3 | DS3 | 6 |
| 4 | Index | 8 |
| 5 | DS0 | 10 |
| 6 | DS1 | 12 |
| 7 | DS2 | 14 |
| 8 | Motor On | 16 |
| 9 | Direction | 18 |
| 10 | Step | 20 |
| 11 | Write Data | 22 |
| 12 | Write Gate | 24 |
| 13 | Track 0 | 26 |
| 14 | Write Protect | 28 |
| 15 | Read Data | 30 |
| 16 | Side Select | 32 |
| 17 | Ready | 34 |
| 30-36 | Ground | 19-33* |
| * odd numbered pins only | ||
- All unlisted pins are NC (not connected) on both sides.
- This connection diagram is for the external floppy drive connector.
PLEASE NOTE!
This information was designed for a 3.5“ floppy, however the information should also be valid for a 5.25” drive.
This information taken from Backup Technique magazine, Dec. 1990
x68000/pc_floppy_drive.txt · Last modified: 2019/08/27 20:45 by 127.0.0.1