User Tools

Site Tools


av:scart_connector

The SCART Connector

The SCART connector, also known as a Péritel or Euroconnector or, is a multi-function connector that is identical in shape, but not function, to the Japanese RGB-21 connector. It carries RGB, composite video in and out, and stereo audio in and out. It can also carry component video and s-video, however these uses are non-standard and aren't supported by all televisions.

This page deals only with the RGB uses for a SCART display, A fantastic page detailing all the other uses for a SCART connector can be found right here.

The Pinout

Pin I/O Description Pin I/O Description
1 O Right 2 I Right
3 O Left/Mono 4 - Audio GND
5 - Blue GND 6 I Left/Mono
7 I Blue 8 I Select
9 - Green GND 10 - Clock (Not Used)
11 I Green 12 O Data (Not Used)
13 - Red GND 14 - Data GND
15 I Red 16 I Blanking
17 - Video GND 18 - Blanking GND
19 O Video Out 20 I Video In
21 - Shield/GND
  • The numbering is the same on the SCART and RGB-21 connectors
  • Direction is display relative. In = into display. Out = out of display.

Special Pins

Two of the SCART pins are for telling the display which mode and display size to use. One selects RGB or composite video, the other selects widescreen (16:9) or regular (4:3) aspect ratio.

Select (Pin 8)
Volts Action
0-2V TV Mode (default)
5-8V 16:9 Mode
9.5-12V 4:3 Mode
Blanking (Pin 16)
Volts Action Pin 20
0-0.4V Composite Video Mode Composite Video
1-3V RGB Mode Composite Sync
  • Not all TVs recognize these signals correctly or at all.
  • Some TVs will not function without these signals. A quick fix can be implemented by using a 9V battery (positive lead on Pin 8, negative lead on any of the grounds) and a 150 Ohms resistor between Pin 8 and Pin 16.
  • Some TVs can be manually forced into these modes.

av/scart_connector.txt · Last modified: 2019/08/27 20:45 by 127.0.0.1